Browse to: http://{ipaddress}:8000
System Manager ID: 7654321
System PIN: 7654321
Friday, 17 July 2015
Canon iR-ADV C5235: Default Username & Password
Monday, 13 July 2015
Zenoss 4.2.5: Graphing Stopped / Image Contains Errors
The image cannot be displayed because it contains errors.
zenrrdcached not running.
SSH to the Zenoss appliance.
[root@localhost]# service zenoss status
Daemon: zeneventserver program running; pid=4058
Daemon: zopectl program running; pid=4164
Daemon: zenrrdcached not running
Daemon: zenhub program running; pid=4211
Daemon: zenjobs program running; pid=4278
Daemon: zeneventd program running; pid=4344
Daemon: zenping program running; pid=4410
Daemon: zensyslog program running; pid=4530
Daemon: zenstatus program running; pid=4513
Daemon: zenactiond program running; pid=4552
Daemon: zentrap program running; pid=4629
Daemon: zenmodeler program running; pid=4634
Daemon: zenperfsnmp program running; pid=4666
Daemon: zencommand program running; pid=4696
Daemon: zenprocess program running; pid=4728
Daemon: zredis program running; pid=4732
Daemon: zenpython program running; pid=4767
Daemon: zenjmx program running; pid=4800
[root@localhost]# service zenoss start
Daemon: zeneventserver is already running
Daemon: zopectl daemon process already running; pid=4164
Daemon: zenrrdcached starting...
rrdcached: can't create pid file '/opt/zenoss/var/rrdcached.pid' (File exists)
rrdcached: daemonize failed, exiting.
Usage: zenrrdcached [run|start|restart|stop|status|stats] [options]
Daemon: zenhub is already running
Daemon: zenjobs is already running
Daemon: zeneventd is already running
Daemon: zenping is already running
Daemon: zensyslog is already running
Daemon: zenstatus is already running
Daemon: zenactiond is already running
Daemon: zentrap is already running
Daemon: zenmodeler is already running
Daemon: zenperfsnmp is already running
Daemon: zencommand is already running
Daemon: zenprocess is already running
Daemon: zredis is already running
Daemon: zenpython is already running
Daemon: zenjmx is already running
[root@localhost]# cd /opt/zenoss/var/
[root@localhost]# mv rrdcached.pid rrdcached.pid.old
[root@localhost]# service zenoss start
[root@localhost]# service zenoss status
Daemon: zeneventserver program running; pid=4058
Daemon: zopectl program running; pid=4164
Daemon: zenrrdcached program running; pid=20133
Daemon: zenhub program running; pid=4211
Daemon: zenjobs program running; pid=4278
Daemon: zeneventd program running; pid=4344
Daemon: zenping program running; pid=4410
Daemon: zensyslog program running; pid=4530
Daemon: zenstatus program running; pid=4513
Daemon: zenactiond program running; pid=4552
Daemon: zentrap program running; pid=4629
Daemon: zenmodeler program running; pid=4634
Daemon: zenperfsnmp program running; pid=4666
Daemon: zencommand program running; pid=4696
Daemon: zenprocess program running; pid=4728
Daemon: zredis program running; pid=4732
Daemon: zenpython program running; pid=4767
Daemon: zenjmx program running; pid=4800
Verify graphing now works.
Remove rrdcached.pid.old
[root@localhost]# rm rrdcached.pid.old
zenrrdcached not running.
SSH to the Zenoss appliance.
[root@localhost]# service zenoss status
Daemon: zeneventserver program running; pid=4058
Daemon: zopectl program running; pid=4164
Daemon: zenrrdcached not running
Daemon: zenhub program running; pid=4211
Daemon: zenjobs program running; pid=4278
Daemon: zeneventd program running; pid=4344
Daemon: zenping program running; pid=4410
Daemon: zensyslog program running; pid=4530
Daemon: zenstatus program running; pid=4513
Daemon: zenactiond program running; pid=4552
Daemon: zentrap program running; pid=4629
Daemon: zenmodeler program running; pid=4634
Daemon: zenperfsnmp program running; pid=4666
Daemon: zencommand program running; pid=4696
Daemon: zenprocess program running; pid=4728
Daemon: zredis program running; pid=4732
Daemon: zenpython program running; pid=4767
Daemon: zenjmx program running; pid=4800
[root@localhost]# service zenoss start
Daemon: zeneventserver is already running
Daemon: zopectl daemon process already running; pid=4164
Daemon: zenrrdcached starting...
rrdcached: can't create pid file '/opt/zenoss/var/rrdcached.pid' (File exists)
rrdcached: daemonize failed, exiting.
Usage: zenrrdcached [run|start|restart|stop|status|stats] [options]
Daemon: zenhub is already running
Daemon: zenjobs is already running
Daemon: zeneventd is already running
Daemon: zenping is already running
Daemon: zensyslog is already running
Daemon: zenstatus is already running
Daemon: zenactiond is already running
Daemon: zentrap is already running
Daemon: zenmodeler is already running
Daemon: zenperfsnmp is already running
Daemon: zencommand is already running
Daemon: zenprocess is already running
Daemon: zredis is already running
Daemon: zenpython is already running
Daemon: zenjmx is already running
[root@localhost]# cd /opt/zenoss/var/
[root@localhost]# mv rrdcached.pid rrdcached.pid.old
[root@localhost]# service zenoss start
[root@localhost]# service zenoss status
Daemon: zeneventserver program running; pid=4058
Daemon: zopectl program running; pid=4164
Daemon: zenrrdcached program running; pid=20133
Daemon: zenhub program running; pid=4211
Daemon: zenjobs program running; pid=4278
Daemon: zeneventd program running; pid=4344
Daemon: zenping program running; pid=4410
Daemon: zensyslog program running; pid=4530
Daemon: zenstatus program running; pid=4513
Daemon: zenactiond program running; pid=4552
Daemon: zentrap program running; pid=4629
Daemon: zenmodeler program running; pid=4634
Daemon: zenperfsnmp program running; pid=4666
Daemon: zencommand program running; pid=4696
Daemon: zenprocess program running; pid=4728
Daemon: zredis program running; pid=4732
Daemon: zenpython program running; pid=4767
Daemon: zenjmx program running; pid=4800
Verify graphing now works.
Remove rrdcached.pid.old
[root@localhost]# rm rrdcached.pid.old
Wednesday, 8 July 2015
Postfix: Increase Message Size Limit
To increase the message size limit:
postconf -e message_size_limit=20971520
service postfix reload
postconf -e message_size_limit=20971520
service postfix reload
Zenoss 4.2.5: Increase Appliance Disk Size
To increase the Zenoss appliance disk:
Shutdown Zenoss virtual machine.
Expand disk in vSphere.
Start virtual machine and connect either via console or SSH.
Commands are highlighted in bold.
[root@localhost ~]# fdisk -l
Disk /dev/sda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 19 152586 83 Linux
/dev/sda2 20 280 2096482+ 82 Linux swap / Solaris
/dev/sda3 281 2610 18715725 8e Linux LVM
[root@localhost ~]# fdisk /dev/sda
The number of cylinders for this disk is set to 5221.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): p
Disk /dev/sda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 19 152586 83 Linux
/dev/sda2 20 280 2096482+ 82 Linux swap / Solaris
/dev/sda3 281 2610 18715725 8e Linux LVM
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Selected partition 4
First cylinder (2611-5221, default 2611):
Using default value 2611
Last cylinder or +size or +sizeM or +sizeK (2611-5221, default 5221):
Using default value 5221
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table.
The new table will be used at the next reboot.
Syncing disks.
[root@localhost ~]# reboot
[root@localhost ~]# fdisk -l
Disk /dev/sda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 19 152586 83 Linux
/dev/sda2 20 280 2096482+ 82 Linux swap / Solaris
/dev/sda3 281 2610 18715725 8e Linux LVM
/dev/sda4 2611 5221 20972857+ 83 Linux
[root@localhost etc]# pvcreate /dev/sda4
Physical volume "/dev/sda4" successfully created
[root@localhost etc]# vgextend vg_root /dev/sda4
Volume group "vg_root" successfully extended
[root@localhost etc]# vgdisplay vg_root | grep "Free"
Free PE / Size 669 / 20.91 GB
[root@localhost etc]# lvextend -L+20G /dev/vg_root/lv_root
Extending logical volume lv_root to 28.00 GB
Logical volume lv_root successfully resized
[root@localhost etc]# resize2fs /dev/vg_root/lv_root
resize2fs 1.39 (29-May-2006)
Filesystem at /dev/vg_root/lv_root is mounted on /; on-line resizing required
Performing an on-line resize of /dev/vg_root/lv_root to 7340032 (4k) blocks.
The filesystem on /dev/vg_root/lv_root is now 7340032 blocks long.
[root@localhost etc]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_root-lv_root
28G 7.4G 19G 29% /
/dev/mapper/vg_root-lv_var_lib_mysql
5.8G 761M 4.8G 14% /var/lib/mysql
/dev/mapper/vg_root-lv_zenoss_perf
3.0G 84M 2.7G 3% /opt/zenoss/perf
/dev/sda1 145M 13M 125M 10% /boot
tmpfs 1.5G 56K 1.5G 1% /dev/shm
Shutdown Zenoss virtual machine.
Expand disk in vSphere.
Start virtual machine and connect either via console or SSH.
Commands are highlighted in bold.
[root@localhost ~]# fdisk -l
Disk /dev/sda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 19 152586 83 Linux
/dev/sda2 20 280 2096482+ 82 Linux swap / Solaris
/dev/sda3 281 2610 18715725 8e Linux LVM
[root@localhost ~]# fdisk /dev/sda
The number of cylinders for this disk is set to 5221.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): p
Disk /dev/sda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 19 152586 83 Linux
/dev/sda2 20 280 2096482+ 82 Linux swap / Solaris
/dev/sda3 281 2610 18715725 8e Linux LVM
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Selected partition 4
First cylinder (2611-5221, default 2611):
Using default value 2611
Last cylinder or +size or +sizeM or +sizeK (2611-5221, default 5221):
Using default value 5221
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table.
The new table will be used at the next reboot.
Syncing disks.
[root@localhost ~]# reboot
[root@localhost ~]# fdisk -l
Disk /dev/sda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 19 152586 83 Linux
/dev/sda2 20 280 2096482+ 82 Linux swap / Solaris
/dev/sda3 281 2610 18715725 8e Linux LVM
/dev/sda4 2611 5221 20972857+ 83 Linux
[root@localhost etc]# pvcreate /dev/sda4
Physical volume "/dev/sda4" successfully created
[root@localhost etc]# vgextend vg_root /dev/sda4
Volume group "vg_root" successfully extended
[root@localhost etc]# vgdisplay vg_root | grep "Free"
Free PE / Size 669 / 20.91 GB
[root@localhost etc]# lvextend -L+20G /dev/vg_root/lv_root
Extending logical volume lv_root to 28.00 GB
Logical volume lv_root successfully resized
[root@localhost etc]# resize2fs /dev/vg_root/lv_root
resize2fs 1.39 (29-May-2006)
Filesystem at /dev/vg_root/lv_root is mounted on /; on-line resizing required
Performing an on-line resize of /dev/vg_root/lv_root to 7340032 (4k) blocks.
The filesystem on /dev/vg_root/lv_root is now 7340032 blocks long.
[root@localhost etc]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_root-lv_root
28G 7.4G 19G 29% /
/dev/mapper/vg_root-lv_var_lib_mysql
5.8G 761M 4.8G 14% /var/lib/mysql
/dev/mapper/vg_root-lv_zenoss_perf
3.0G 84M 2.7G 3% /opt/zenoss/perf
/dev/sda1 145M 13M 125M 10% /boot
tmpfs 1.5G 56K 1.5G 1% /dev/shm
Friday, 3 July 2015
Notepad: Time & Date Stamp
Press F5 in Notepad to add the time and date.
09:00 03/07/2015
09:00 03/07/2015
Thursday, 2 July 2015
Windows 8.1: Find Computer Name At Ctrl-Alt-Del Logon Screen
To find the computer name of a Windows 8.1 domain workstation at the Ctrl-Alt-Del logon screen:
Click Other user
Type .\ in the User name field and the computer name will be displayed instead of the domain.
User name: .\
Password:
Sign in to: computername
Alternatively:
Click Other user
Type .\ in the User name field and the computer name will be displayed instead of the domain.
User name: .\
Password:
Sign in to: computername
Alternatively:
- Click Other user
- Click How do I sign in to another domain?